Cerca risultati per 'roll'

4 grey rubber non marking casters (2 with brake) Ø 200
Sizes mm 1230x750x1340h
3 shelves within (2 with adjustable height)
4 bumpers in grey non  marking rubber
Door with lock and key

More...

Capacity Kg 1.000
Lifting height mm 1.600
Push handles
Sizes mm 1750x750x1970
Minimum overall height mm 1.970
Maximum overall height mm 1.970
Forks Length mm 1.150
Width mm 150
Thickness mm 70
Inner distance between forks mm 230
2 back wheels in nylon (stainless steel mounting bracker) Ø150 - 1 with brake
2 leaktight nylon front roller Ø 82x62
Turning radius Wa mm 1.650
Kiln dried epoxy powder painting

More...

Sizes:
Overall fork length mm 1150
Width over forks mm 540
4 nylon front rollers
Nylon wheel Ø 200
3 positions fingertip controls
Capacity Kg. 2000

More...

Portata Kg 1.200 | Elevazione mm 1.600 | Sollevamento Elettrico con Joystick | Movimentazione elettrica con controllo sul timone| Cassone batteria Corazzata | Pedana uomo a bordo richiudibile | Protezioni laterali richiudibili | More...

Rider platform
Folding side supports
Crushproof frame with extruded section
Plexiglass see-yhrough mast
Direction handle on thrust bearings

More...

Rider platform
Folding side supports
Crushproof frame with extruded section
Plexiglass see-through mast
Direction handle on Thrust bearings

More...

This electric mobile filings cart is designed to carry heavy paper filing efficiently without effort and for long trips. The sizes of this cart and the height of the middle shelf are designed to carry filings or boxes used in tribunal or office. The 500W motors overcome easily with Kg. 100 a 12% slope. Capacity Kg. 300

More...

Sizes mm 1430x630x1150h
Capacity Kg. 500
Maximum speed 5 Km/h
Battery life time: 4 hour
2 pneumatic wheels iron core mm 260
2 blue rubber casters polyamide core mm 150
Gel battery V/Ah 2x 12/30
Motor 24V 800W
External charger 220V/50 Hz - V/A 24/12 included
EPOXY POWDER PAINTING

More...

Front wheels mm 125 non marking rubber wheels
Back wheels mm 200 non-marking rubber wheels
Sizes mm 620x950x1000h
Nesting distance mm 300
Wire mesh platform f.8:
Width mm 370/470
Depth mm 700
Capacity Kg. 200

More...

Airport trolley in stainless steel, suitable for operations in airports close to the seaside. 
Its stainless steel construction does not rust even when exposed to salty air.

The authomatically engaged brake stops the trolley when the operator release the handle, intentionally or by mistake. 

More...

Portata Kg 1.200; Elevazione mm 2.900; Sollevamento Elettrico con Joystick; Movimentazione elettrica con controllo sul timone; Cassone batteria Corazzata; Pedana uomo a bordo richiudibile; Protezioni laterali richiudibili. More...

Rider platform
Folding side supports
Crushproof frame with extruded section
Plexiglass see-through mast
Direction handle on thrust bearings
Mosfet control drive
Electromagnetic brake
Battery 24V 210Ah

More...

Rider platform
Folding side supports
Crushproof frame with extruded section
Plexiglass see-through mast

More...

Rider platform
Folding side supports
Crushproof frame with extruded section
Plexiglass see-through mast
Direction handle on thrust bearings

More...

Rider platform
Folding side supports
Crushproof frame with extruded section
Plexiglass see-through mast
Direction handle on thrust bearings

More...

2 pneumatic wheels with inner tube Ø 260
Sizes mm 490x560x1200h
Noseplate Sizes: 320x200 mm
Capacity Kg. 250
COMPLIANT WITH CE STANDARDS

More...

Sizes:
Overall fork length mm 1150
Width over forks mm 540
4 nylon front rollers
Nylon wheel Ø 200
3 positions fingertip controls
Capacity Kg. 2000

More...

Rider platform 
Folding side supports
Crushproof frame with extruded section
Plexiglass see-through mast
Direction handle on thrust bearings

More...

Single cylinder truck for Ø 260
2 non marking rubber wheel Ø 200
Sizes 440x400x1250h mm
Double straps with buckle for containing cylinder
AISI 304 Stainless Steel

 

More...

4 sided mesh truck in stainless steel AISI 304 Loading platform in stainless steel size mm 600x900 thickness 12/10 4 mesh walls 30x30 fixed with screws Trucks are supplied in an assembly kit in order to reduce thei overall size Spacing sizes mm 835x540x590 More...

Rider platform
Folding side supports
Crushproof frame with extruded section
Plexiglass see-through mast
Direction handle on Thrust bearings

More...

Rider platform
Folding side supports
Crushproof frame with extruded section
Plexiglass see-through mast
Direction handle on Thrust bearings

More...

Base frame and platform made of steel 
Smooth plate loading platform
Foot operated hydraulic lift pump 
Smooth rate of lowering adjustable through the release handle 
Polyurethane wheels rolling easily on a roller bearing - 2 wheels with parking brake  
ACRILIC POWDER PAINTING

More...

Rider platform
Folding side supports
Crushproof frame with extruded section
Plexiglass see-through mast
Direction handle on Thrust bearings

More...

Base frame and platform made of steel 
Lift / lower controls on the control handle 
Platform 815x500
100 working cycle
Lift motor 24 V 800W
Batteries included: 2X12V 24Ah
Charger 24V 4A
Charging time TIME 6-8 HOURS
Smooth plate loading platform  
Foot operated hydraulic lift pump 
Smooth rate of lowering adjustable through the release handle  
Polyurethane wheels rolling easily on a roller bearing - 2 wheels with parking brake  
ACRILIC POWDER PAINTING

More...

Sizes mm 1483x630x1150h
Capacity Kg. 500
Maximum speed 5 Km/h
Battery life time: 4 hour
2 pneumatic wheels iron core mm 260
2 blue rubber casters polyamide core mm 150
Motor W 800
EPOXY POWDER PAINTING

More...

Sizes mm 1430x630x1150h
Capacity Kg. 500
Maximum speed 5 Km/h
Battery life time: 4 hour
2 pneumatic wheels iron core mm 260
2 blue rubber casters polyamide core mm 150
Gel battery V/Ah 2x 12/30
Motor 24V 800W
External charger 220V/50 Hz - V/A 24/12 included
EPOXY POWDER PAINTING

More...

This electric mobile filings cart is designed to carry heavy paper filing efficiently without effort and for long trips. The sizes of this cart and the height of the middle shelf are designed to carry filings or boxes used in tribunal or office. The 800W motors overcome easily a 12% slope with a load of Kg. 100 . Capacity Kg. 300

More...

Capacity Kg 1.200

Lifting height mm 1.600

Joystick lift controls

Self propelled drive with handle control

More...

Capacity Kg 1.200

Lifting height mm 1.600

Joystick lift controls

Self propelled drive with handle control

More...

Lock and roll ladder with  3 steps with working platform 
Compact aluminium  frame easily reclosable for an easy handling
Steps with a non slipping surface welded to the stringers
Large working platofrm  with safety vertical plate on 3 sides
100 cm parapet grants a high  security for teh operator.
The handrails on both sides grant  easy and safe climbs and descents

More...

Lock and roll ladder with  4 steps with working platform 
Compact aluminium  frame easily reclosable for an easy handling
Steps with a non slipping surface welded to the stringers
Large working platofrm  with safety vertical plate on 3 sides
100 cm parapet grants a high  security for teh operator.
The handrails on both sides grant  easy and safe climbs and descents

More...

Lock and roll ladder with  5 steps with working platform 
Compact aluminium  frame easily reclosable for an easy handling
Steps with a non slipping surface welded to the stringers
Large working platofrm  with safety vertical plate on 3 sides
100 cm parapet grants a high  security for teh operator.
The handrails on both sides grant  easy and safe climbs and descents

More...

Lock and roll ladder with  6 steps with working platform 
Compact aluminium  frame easily reclosable for an easy handling
Steps with a non slipping surface welded to the stringers
Large working platofrm  with safety vertical plate on 3 sides
100 cm parapet grants a high  security for teh operator.
The handrails on both sides grant  easy and safe climbs and descents

More...

Lock and roll ladder with  7 steps with working platform 
Compact aluminium  frame easily reclosable for an easy handling
Steps with a non slipping surface welded to the stringers
Large working platofrm  with safety vertical plate on 3 sides
100 cm parapet grants a high  security for teh operator.
The handrails on both sides grant  easy and safe climbs and descents
Ladders "Gamma" are built in accordance with UNI EN 131 1/2/3 standard and with the italian law 

More...

Lock and roll ladder with  8 steps with working platform 
Compact aluminium  frame easily reclosable for an easy handling
Steps with a non slipping surface welded to the stringers
Large working platofrm  with safety vertical plate on 3 sides
100 cm parapet grants a high  security for teh operator.
The handrails on both sides grant  easy and safe climbs and descents

More...

Lock and roll ladder with  9 steps with working platform 
Compact aluminium  frame easily reclosable for an easy handling
Steps with a non slipping surface welded to the stringers
Large working platofrm  with safety vertical plate on 3 sides
100 cm parapet grants a high  security for teh operator.
The handrails on both sides grant  easy and safe climbs and descents

More...

Lock and roll ladder with  10 steps with working platform 
Compact aluminium  frame easily reclosable for an easy handling
Steps with a non slipping surface welded to the stringers
Large working platofrm  with safety vertical plate on 3 sides
100 cm parapet grants a high  security for teh operator.
The handrails on both sides grant  easy and safe climbs and descents

More...

Lock and roll ladder with  11 steps with working platform 
Compact aluminium  frame easily reclosable for an easy handling
Steps with a non slipping surface welded to the stringers
Large working platofrm  with safety vertical plate on 3 sides
100 cm parapet grants a high  security for teh operator.
The handrails on both sides grant  easy and safe climbs and descents

More...